Our Redmond-based crews carry the parts and the know-how to get your air moving again today. Same-day appointments available across Redmond and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
If anything feels off after we leave, a follow-up call gets a technician back out to make it right.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
We're not interested in being the cheapest quote on the page — we're the crew that answers the phone at 2am when your furnace quits in the middle of a cold snap. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, residential or commercial.
Redmond's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes the maintenance schedules we recommend — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. We track arrival windows, callback rates, and repeat-issue complaints internally so problems get caught before they become patterns, because a customer who trusts us once tends to call us again — and Redmond is a small enough community that reputation travels fast.
That local context saves time on every call, because we're not starting from zero on basic questions about your neighborhood or your system. Our warranty and service history records stay attached to your address, so any future technician who visits already has the full picture.
We cover the full range of heating, cooling, and air quality work Redmond properties actually need.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Redmond dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Redmond homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
Most installs in Redmond are completed in a single day, and we walk you through the new thermostat and any app controls before we leave.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services light industrial and warehouse ventilation across Redmond, with priority response for facilities that can't afford downtime.
Our commercial techs are trained to work around your customers and staff, scheduling noisy or disruptive work outside peak hours whenever possible.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle humidifier, dehumidifier, and air purifier installation for Redmond households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
We'd rather set clear expectations upfront than make vague promises we can't back up.
Details vary by job type and are always shared upfront, never buried in fine print.
We quote a flat rate before work begins and that number doesn't change once you approve it.
A technician doesn't consider the job done until the system is tested and performing correctly.
Most breakdowns don't happen without warning — they announce themselves for weeks before the system actually quits.
Ignoring new noises is one of the fastest ways to turn a small repair into a major one.
If some rooms stay hot or cold no matter what the thermostat says, the system may be struggling to distribute air evenly.
A tune-up often identifies exactly what's driving the extra energy use.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
A musty smell often points to mold or moisture buildup somewhere in the ductwork.
We'll always tell you honestly when a repair is the better call versus when it isn't.
We explain diagnostic fees and repair estimates before authorizing work.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
If something isn't right after we leave, we come back and make it right.
Our techs recognize brand-specific quirks instead of learning your system on the job.
We explain what failed, why it failed, and what the options are.
Maintenance plan members get priority scheduling and discounted rates.
We don't write these — our customers do.
"I called three other companies first and this was the only one that actually picked up. No pressure to buy a whole new system when a repair was all we needed."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. You can tell these guys actually know what they're doing."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. Would recommend to anyone in Redmond needing a real replacement, not a patch job."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Documentation for our records was thorough and easy to file."
"Got quotes from four different companies for a replacement and this was the only one that actually walked me through the load calculation. Would use them again without hesitation."
"The tech walked me through what he was checking as he went, which I really appreciated. This is the company I'm saving in my phone now."
After thousands of service calls across Redmond, a handful of causes show up again and again.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the heaviest cooling months hit, it's worth having the refrigerant charge checked, the condenser coils cleaned, and the filter replaced — all of which directly affect how hard the compressor has to work.
Keeping vents unblocked by furniture and rugs helps maintain even airflow throughout the home. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Whether your Redmond home has a traditional split system, a ductless mini-split, a heat pump, or a hybrid dual-fuel setup, our crews are equipped to diagnose and repair it. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Experienced with the light industrial and retail equipment common across the area.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
Our policy is simple: you approve the number before we touch the system.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Ask your technician about current plan pricing during any service call.
If you're unsure whether your address falls in our service area, a quick call to +1-866-805-8548 will confirm it.
Property managers and business owners can request a dedicated point of contact for ongoing service.
Yes, we service systems regardless of who originally installed them.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Systems that run harder due to heavy year-round use may benefit from more frequent check-ins.
Check that the thermostat has power and the batteries aren't dead, and check your breaker panel for a tripped switch before calling.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
More involved repairs, like a coil replacement or a refrigerant leak repair, take longer and the tech will give you a realistic estimate before starting.
For most residential visits, yes, an adult should be present to grant access and approve any quoted work.
From the older, established streets near the center of Redmond to the newer developments on the outskirts, our trucks cover the full footprint of the city.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Redmond.
Qualifying installations can be financed through options we'll walk you through during your in-home estimate, with terms explained clearly before you commit to anything. If a rebate or local incentive program applies to your Redmond installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Redmond and the neighboring communities, keeping response times tight because our trucks stay close to home.
Property managers with multiple Redmond addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
